» Setting Up the Machine » Selecting the method for connecting to the machine
|
Selecting the method for connecting to the machine
Select from the following three methods, depending on your environment and devices.
NOTE
USB connection and network connection functions
Available at the same time.
USB connection
Connect using a USB cable.
The machine does not come with a USB cable. Have cables ready as needed.
Follow the steps in the procedure below.
Wired LAN
Connect using a LAN cable.
NOTE
Required devices
Check to make sure that there is a free port for connecting the machine or the computer you use to the router or hub.
Use a Category 5 or higher twisted pair cable for the LAN.
Supported operating systems
Windows 2000
Windows XP
Windows Vista
Windows 7
Windows Server 2003*1
Windows Server 2008*1
Mac OS 10.4.9 or later (except for Classic environment)
*1
These operating systems are only supported under the following conditions:
These operating systems need to be connected over the network.
The scan functions are not supported.
02EU-012